![]() This is easy just google for it, but watch out for malware! A copy of the Motorola RSS programming software for the GM950.Required changesĪfter clearing the cable situation, let’s setup the software. Click ok – and you are done with the cable config. Make sure to adjust the Dosbox config below as well if you use a different port.Īlso make sure that the FIFO buffer is off. If COM1 is in use at the moment use another COM port. Locate the COM & LPT entry and double click on the device.įirst change the COM Port Number to COM1. Go to the Windows Controlpanel -> System -> Device Manager. Once you have obtained the cable, plug it in and make a few changes to the device. If you are looking for one, try it via Amazon, AliExpress or eBay. It never worked for the GM300, but it works like a charm on the GM950. I originally bought it for my GM300 devices. I got lucky and found a MaxtonData (RPC-MM-U) USB cable in one of my boxes. The most important lines BUS+ and GND are the same. Not sure about this but if you want to build a cable on your own it might be interesting to look into this. I assume they are some sort of HI / power pins which you can see in a bunch of other Motorola / FTDI based schematics.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |